Security Menu - Pantum CP2500 Series User Manual

Understanding printer menus
Use
USB Buffer
Disabled
Auto
3K to [maximum size allowed]
Mac Binary PS
On
Off
Auto
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
ENA Gateway
yyy.yyy.yyy.yyy

Security menu

Set Date and Time menu
Use
Current Date and Time
Manually Set Date and Time
Time Zone
To
Set the size of the USB input buffer.
Notes:
•
Auto is the factory default setting.
•
Disabled turns off job buffering. Any jobs already buffered in the printer
hard disk are printed before normal processing resumes.
•
The USB buffer size value can be changed in 1KB increments.
•
The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buffers, and whether Resource Save is
enabled or disabled.
•
To increase the maximum size range for the USB Buffer, disable or
reduce the size of the parallel, serial, and network buffers.
•
The printer automatically restarts when the setting is changed from the
printer control panel. The menu selection is then updated.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
Auto is the factory default setting.
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Set the network address, netmask, and gateway information for an external print
server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
To
View the current date and time settings for the printer.
Enter the date and time.
Notes:
•
Date/Time is set in YYYY-MM-DD HH:MM:SS format.
•
Manually setting the date and time sets "Enable NTP" (Network Time
Protocol) to On.
Select the time zone.
Note: GMT is the factory default setting.
67