Table of Contents
Advertisement
Additional printer setup
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Unpack the optional 650‑sheet duo tray, and then remove the packing material and dust cover.
4
Align the printer with the tray, and then lower the printer into place.
17
Advertisement
Table of Contents
