Retrieve Recordings From System Controller - Axis W800 User Manual

Axis body worn solution
Maintain your system
9. Finish the system setup.
10. Allow cameras back into the system.
Important
• Restoring a system with only one system controller means reestablishing the connection between the body worn system and
the existing cameras. It doesn't restore system configurations, such as users, camera profiles, content destination, etc.
• You can only restore a system if you have the System restore key. You may not be able to download a System restore
key if the system has failed. We recommend that you download the System restore key during the initial system setup,
and store it in a secure location.
Download System restore key
There are two ways to download the System restore key:
• The System restore key is generated and downloaded during the system setup.
• You can also download a System restore key at any time in AXIS Body Worn Manager
To download the System restore key in AXIS Body Worn Manager:
1. Go to
2. Click System restore key.
3. Enter the Super admin passphrase that you created in the system setup.
4. Click Download and store the System restore key in a secure location.
Important
• The System restore key is passphrase protected.
• Always store the System restore key and the Super admin passphrase in a secure way.
Allow cameras back into the system
For security reasons, a camera that is undocked for eight weeks enters safe mode.
You can allow a camera, that is in safe mode, back into the system. This requires access to the highest security level in the body
worn system, permitted using the Super admin passphrase.
To allow a camera to reestablish the connection to the body worn system:
1. Go to Dashboard
2. Open the camera with alert In safe mode.
3. If there is more than one camera in safe mode, select the cameras you want to allow.
4. Click Next.
5. Enter the Super admin passphrase.
6. Click Allow cameras.

Retrieve recordings from system controller

Content destinations normally accept recordings from camera users and cameras that have been removed from the content
destination. But if this isn't supported, and you remove users or cameras in the content destination instead of in AXIS Body Worn
> System restore key.
.
43