Axis W800 User Manual page 34

Axis body worn solution
Monitor your system
Malfunctioning
Recordings couldn't be transferred
Storage almost full
Storage full
The system controller is malfunctioning.
The recordings couldn't be transferred to
the content destination.
The storage is almost full.
The storage is full.
34
4. Connect a functioning
docking station to the same
docking station port on the
system controller. If the
message disappears, the
original docking station
is faulty and should be
replaced. If the message
remains, continue to next
step.
5. Restart the system controller.
If the message remains, the
system controller is faulty
and should be replaced.
Try the following:
• Restart the system controller.
If the message remains, replace the
system controller.
Download the recordings that couldn't be
transferred. See Retrieve recordings from
system controller on page 43.
Try the following:
• Make sure the content
destination is up and running.
• Check the network
connection to the content
destination.
• Make sure recordings transfer
normally to the content
destination.
• Make sure you have enough
licenses in your content
destination.
• Make sure the date and time
in the content destination is
synchronized with that in the
body worn system.
Try the following:
• Make sure the content
destination is up and running.
• Check the network
connection to the content
destination.
• Make sure recordings transfer
normally to the content
destination.
• Make sure you have enough
licenses in your content
destination.
• Make sure the date and time
in the content destination is