Change Connection File; Remove Hardware From The System - Axis W800 User Manual

Axis body worn solution
Maintain your system
Transfer a camera to another body worn system
To use a body worn camera in another system, you must first remove the camera from your current system. Then you can add the
camera to the new system.
To transfer a camera to another body worn system:
1. Remove the camera from your current system, see Remove a camera on page 38.
2. Follow the instructions in Add cameras to add the camera in the new system.

Change connection file

If the connection to the content destination is lost, a possible solution is to replace the current connection file with a new one.
The connection can get lost when the content destination gets a new IP address, or when certain configurations are changed
in the content destination.
1. Go to
2. Click
3. Upload the new connection file.
4. Click Save.
Note
If you want to switch to a different content destination you need to reset the system, see Reset system on page 41.

Remove hardware from the system

Remove a camera
Note
You can remove a camera both docked and when it's in use. If you choose to remove the camera when it's in use, all
content is transferred, and the camera is removed after it's docked. When the content transfer is complete, the camera is
reset to factory default with the latest uploaded firmware.
To remove a camera from the body worn system:
1. Go to .
2. Open the camera you want to remove.
3. Open the context menu
4. Click Remove.
Important
Never remove body worn cameras from your content destination. Always use AXIS Body Worn Manager to remove cameras.
If the camera is lost or damaged beyond repair, see Force remove camera on page 39.
.
under Configuration for your content destination.
and click Remove.
38