Axis W800 User Manual page 42

Axis body worn solution
Maintain your system
Restore a system with more than one system controller
Restoring the body worn system requires a Configure the system backup on page 10.
To restore the body worn system:
1. Access the extension system controller containing the system backup (enter the IP address of the system controller
in a web browser).
2. Open the context menu
3. Click Restore system.
4. Enter the Super admin passphrase.
5. Click Restore.
6. Reestablish the connection between the restored system and the existing extension system controllers:
6.1 Reset all extension system controllers, see Reset extension system controller on page 40.
6.2 Configure all extension system controllers, see Extend the system on page 19.
7. Reestablish the connection between the body worn system and the existing cameras. see Allow cameras back into the
system on page 43.
Important
Remember to re-configure the backup when the system restore is done. The previous backup system controller is now where
you access AXIS Body Worn Manager. You also need to replace the malfunctioning system controller with a new one.
Restore a system with a single system controller
1. Install a new system controller.
2. Access the new system controller, see Access AXIS Body Worn Manager for the first time.
3. Click Restore.
4. Create an administrator account and click Next.
5. Log in using your administrator account credentials. Your username is root.
6. Install the latest firmware and click Next.
7. Click Select System restore key, then locate and open your previously downloaded System restore key.
8. Enter your Super admin passphrase and click Next.
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=58704&section=restore-a-system-with-more-than-one-controller-system
Axis body worn system backup and restore
.
42