Activate Recording Automatically - Axis W800 User Manual

Axis body worn solution
Configure your system

Activate recording automatically

In combination with pre-buffer, automatic recording activation ensures that the whole incident is captured without the need for the
camera user to manually start a recording. You can set up cameras to start recording automatically using:
• Fall detection on page 20
• Unholster detection on page 20
• Wireless broadcast on page 21
Fall detection
Note
Only some camera models support this feature.
Fall detection triggers video recording automatically when the person wearing the camera falls. In combination with pre-buffer,
this feature ensures that the whole incident is captured without manual activation.
To turn on fall detection:
1. Go to
2. Open the camera profile that you want to edit.
3. Turn on Fall detection.
Unholster detection
A holster sensor detects unholstering to automatically trigger video recording. In combination with pre-buffer, this feature ensures
that the whole incident is captured without manual activation. This feature requires pairing the camera user with a Yardarm holster
sensor.
Note
You can combine unholster detection with wireless broadcasts. A camera that is paired with a holster sensor can receive
wireless broadcasts, but it can't broadcast signals.
To enable unholster detection:
1. Make sure the holster sensor is disconnected from its power supply.
2. Go to
.
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=58704&section=unholster-detection
Set up a holster sensor for your body worn camera
and select the user that you want to pair the holster sensor with.
20