Axis body worn solution
Secure your system
3. Click
4. Select Create self-signed certificate and click Next.
5. In Create self-signed certificate, enter your values and click Create.
6. Open the context menu
7. Click Create signing request.
8. In Create certificate signing request, click Create.
9. In the Signing request dialog, copy the whole text and paste it into a file with the file extension .csr.
Note
Alternatively, you can create a signing request for the already existing Default (self-signed) certificate.
Install certificate
Note
The installed certificate gets its name from the uploaded .crt file, minus the suffix. This name must be unique.
1. Go to
2. Click Show certificate settings.
3. Click
4. Select Upload a CA certificate.
5. Click Select file and locate your signed certificate with the filename <filename>.crt.
6. Click Install.
7. Open the context menu
8. Click Activate.
Set up 802.1x
1. Connect the body worn system to a network without 802.1x.
2. Go to
3. Click Show certificate settings.
4. Click
5. Under 802.1x select the certificate you installed.
6. Enter EAP identity.
7. Select Use IEEE 802.1x.
8. Click Save.
9. The page displays Connecting...
.
next to the new certificate.
> Certificates and IEEE 802.1x.
.
next to the certificate.
> Certificates and IEEE 802.1x.
and create a new, or install an existing certificate.
29