Import Users; Add Cameras; Assign A User To A Camera - Axis W800 User Manual

Axis body worn solution
Configure your system
Note
• This option is presented only if you're using AXIS Case Insight.
• When you enter a user's email address as username, a corresponding guest user is created in AXIS Case Insight.
This guest user has no access to any recorded evidence in the system. Access rights for the user are managed in
AXIS Case Insight.
• You can't change the username for an existing user. To do this, you must remove the user and add it again.
3.4 Choose a Camera profile
4. Click Add user.

Import users

The body worn system allows you to import your camera users' data from a CSV UTF-8 (Comma delimited) file. This is the most
efficient way to add new users, as well as update usernames and camera profiles for existing camera users with a user ID.
You can also include RFIDs for each user. This means that if you're using self-assign camera assignment, you can associate RFID
tags with all the users at once, instead of pairing each self-assign tag individually.
If you already have users in the system that you want to update before doing the import, see Export users on page 31.
To import camera users:
1. Go to
2. Open the context menu
3. Download the CSV template, which shows you the correct format for the users, user IDs, and RFIDs.
4. Enter the users and user IDs in the CSV file.
5. Click Select CSV file and select the file that you created.
6. Resolve any conflicts shown in the status window and then click Import.

Add cameras

1. Dock the cameras that you want to add to your system. Camera LEDs flash amber.
2. Go to .
3. In the camera list, click New.
4. In the Add cameras list, select the cameras you want to add and click Add.
The camera state changes from Adding to Docked or Charging when a camera has been added. It can take a couple
of minutes.

Assign a user to a camera

Note
• A camera doesn't function unless a user is assigned to it. Camera LEDs flash red when you undock it to indicate that a user
must be assigned to the camera before use.
• You can only assign a user to a camera that supports all features in the user's camera profile.
There are two ways to assign a user to a camera:
.
and click Import users.
16