Record Location; Limit Access To Recordings; Cloud Extensions - Axis W800 User Manual

Axis body worn solution
Configure your system
4. To make the camera start recording when it receives a broadcast from another camera, turn on Receive wireless broadcast.

Record location

Note
Only some camera models support this feature.
You can record the geographical position of the camera. The recorded location data enables content destinations to show the
camera's movement as a track, or as a single location on a map. This information can then be used to identify where an incident took
place and to get a clearer picture of the whole course of events. The feature has two modes:
Start and end - Record the geographical position of the camera when and where a recording starts and ends.
Track - Continuously record the geographical position of the camera throughout the whole recording including the pre-buffer.
Track mode is available only if supported by the content destination. You can't combine it with Power saving mode.
To include the geographical position in the recordings:
1. Go to
2. Select a camera profile.
3. Expand the camera model for which you want to include the geographical position in the recordings.
4. Turn on Location.
5. Select a Mode.
Note
• Location uses satellites (GNSS) to get the camera's position when used outdoors. With Cloud Extensions on, Assisted GNSS
(ephemeris) improves positioning performance and decreases the time to get the first satellite fix.
• Different content destinations can present or use location data in different ways. For example, it can be used for searching
recordings, or be displayed in a map or bookmark for a recording.
• The location feature is only for outdoor use. We recommend that you turn it off for indoor use.
• The location feature increases battery consumption.
You can also include the continuously updated position for a recording as an overlay in the video. To turn this on, go to Overlay in the
camera profile and turn on Position.

Limit access to recordings

The Allow access to recordings setting lets you decide whether the camera user can view recordings in AXIS Body Worn Assistant, or
not. You can turn it on or off in the camera profile. To turn off access to recordings:
1. Go to
2. Open the profile you want to edit.
3. Deselect Allow access to recordings.

Cloud extensions

The body worn system comes with a set of standard features out of the box. The cloud extensions are a set of additional cloud-based
capabilities.
.
.
22