Get Started - Axis W800 User Manual

System controller, mini bullet sensor

Hide thumbs Also See for W800:

Table of Contents

Axis body worn solution

Get started

The recommended workflow to install and configure your system is:

1. Install your system on page 7

2. Open AXIS Body Worn Manager and configure system settings. See Access AXIS Body Worn Manager for the first time on

page 8

3. Edit a camera profile on page 11

4. Create a user on page 15

5. Add cameras on page 16

If you're using fixed camera assignment, Assign a user to a specific camera. Alternatively, if you're using self-assign camera

assignment, see Set up self-assign camera assignment.

You can add more than 40 cameras to your system by adding more system controllers. The extension system controllers become

instances of the existing system. All settings are inherited from the system to the extension system controllers. The users and

cameras that are added to the extension system controller are managed through AXIS Body Worn Manager. For information on

how to extend your system by adding more system controllers, see Extend the system.

To watch this video, go to the web version of this document.

help.axis.com/?&piaId=58704&section=this-is-the-axis-body-worn-solution

Get started with the Axis body worn solution

Table of Contents

Tw1200