Download Camera Usage Report; Monitor System Controller Storage; Check How Long A Camera Has Been Undocked - Axis W800 User Manual

Axis body worn solution
Monitor your system
Unavailable

Download camera usage report

The camera usage report shows for each user how the assigned camera was used for the past seven days. This includes for example,
start and stop recording, docking, power on and off, and audio mute.
To download the camera usage report:
1. Go to
2. Open the context menu
3. Click Camera usage report.
4. Click Download.
The downloaded zip file contains a folder for each user.
Note
The report contains camera usage for up to seven days. If a previous report was downloaded less than seven days ago, the
report contains camera usage from the time of the previous report, and until the time of the new report.

Monitor system controller storage

Monitoring system controller storage can help you identify potential file transfer error.
AXIS Body Worn manager displays Storage used and Storage reserved for each system controller.
Storage used - The storage in the system controller is used as a buffer when recordings are transferred from a camera to the content
destination. A continuous high level of storage used may indicate transfer error.
Storage reserved - When a camera is docked it reserves the memory needed to offload its content to the system controller. When all
files are transferred to the content destination, the reservation is removed. Any remaining storage reserved may indicate transfer error.
To view storage information go to

Check how long a camera has been undocked

In AXIS Body Worn Manager, you can check how long a camera has been undocked. This can, for example, give you an indication that
a camera is lost or needs a firmware upgrade.
To check how long a camera has been undocked, go to
The system controller is unavailable.
.
.
, and open the system controller that you're interested in.
, and click the camera that you're interested in.
35
synchronized with that in the
body worn system.
Try the following:
• Make sure the system
controller is turned on.
• Check the network
connection to the system
controller.