Axis W800 User Manual page 39

Axis body worn solution
Maintain your system
Force remove camera
You can force remove a camera from the body worn system if the camera is lost or damaged beyond repair. This option is available
only when the camera is in state Undocked. To force remove a camera requires access to the highest security level in the body
worn system, permitted using the Super admin passphrase. To force remove a camera:
• Go to .
• Open the camera you want to remove.
• Open the context menu
• Click Remove.
• Enter the Super admin passphrase.
• Click Force remove.
Remove an extension system controller
Note
• Always remove the extension system controller from the system in AXIS Body Worn Manager before you physically
disconnect it.
• When you remove a system controller from the body worn system, all content is transferred to the content destination, and
the system controller is reset to factory default settings.
To remove an extension system controller from the body worn system:
1. Go to
2. Click the system controller you want to remove.
3. Open the context menu
4. Click Remove.
If the system controller is lost or damaged beyond repair, see Force remove extension system controller on page 39.
Force remove extension system controller
Important
You can never use a force removed extension system controller again.
You can force remove an extension system controller from the body worn system if it's lost or damaged beyond repair. This option
is available only when the extension system controller is in state Unavailable. Force removing an extension system controller
requires access to the highest security level in the body worn system, permitted using the Super admin passphrase. To force
remove an extension system controller:
• Remove the extension system controller that you want to force remove, see Remove an extension system controller on page
39. If the extension system controller is in state Unavailable, it stays in the device list, but is grayed-out.
• Open the extension system controller you want to force remove again.
• Open the context menu
• Enter the Super admin passphrase.
• Click Force remove.
and click Remove.
.
and click Remove.
and click Remove.
39