Using The Vivo 3 With The Trolley - Breas Vivo 3 User Manual

6.6.10

Using the Vivo 3 with the Trolley

Intended Use
The intended use of the trolley system is to allow patient mobility while receiving ventilator
treatment. The trolley shall only be used in indoor, hospital environment. The trolley system
consists of a trolley base and a mounting bracket.
This section describes how to use the Vivo 3 and a trolley with mounting bracket.
Mount and dismount the Vivo 3 as shown in the picture:
The bottom plate is mounted to the trolley using four
screws.
Before mounting the bottom plate, the attachment
must be dismounted:
Be careful when handling the trolley with the ventilator
mounted, in order to avoid any risk of the trolley fall-
ing. The trolley can be tipped 10° and return to vertical
position, when loaded in accordance with the weight
specifications below.
WARNING!
The maximum total weight of the trolley and added
accessories is 37 kg (82 lbs). (Trolley base weight = 12
kg (26 lbs), maximum externally added load = 25 kg
(55 lbs).)
• The maximum load of the trolley basket is 0.9 kg
(2 lbs).
• The maximum load of the trolley rail is 9 kg (20
lbs).
No maintenance is required.
50 How to Use the Vivo 3
User Manual
1 2
1
Doc. 007231 F-3