Stop The Treatment - Breas Vivo 3 User Manual

Confirm Start/Stop is set to Off
1 Make sure that the Vivo 3 is in Standby mode.
2 Press the On/Off button.
3 The machine performs a function test as described above.
6.3

Stop the Treatment

It is possible to choose how the machine will start and stop. If you want to confirm the start-
ing and stopping or not, see3.5.5.1 Device Settings, page 28
Confirm Start/Stop is set to On
1 Press and hold the On/Off button until the
Stopping Treatment progress bar is filled.
⇒A request for a complementary action is now
displayed for stopping the treatment. If no
complementary action is taken within 6 seconds, the
Vivo 3 reverts to normal operation.
2 Do one of the following:
• Press the Mute Alarm button (a). (Always
• Press Ramp (b) for a ramped stop. (Available if
Confirm Start/Stop is set to Off
1 Press the On/Off button.
2 Press Ramp (b) for a ramped stop. (Available if a Ramp Down time has been specified.)
Doc. 007231 F-3
available.)
a Ramp Down time has been specified.)
a
How to Use the Vivo 3 41
User Manual