Using The Heated Circuit - Breas Vivo 3 User Manual

Activate the Humidifier
1 Press the Setup button twice.
⇒The second setup page is now displayed, with humidifier settings.
2 Press the Up arrow button until the setting Humidifier is selected.
3 Press the Right arrow button to turn the humidifier on.
⇒The value is shifted to On and the humidifier symbol is lit on the display.
⇒The setting for Humidifier Level is displayed.
4 Press the Down arrow to select the Humidifier Level setting.
5 Press the Left arrow button to decrease the humidification or the Right arrow button
to increase the humidification.
When not Using the Humidifier
1 Take out the humidifier by pushing down the
locking latch (a) and then pull the humidifier out.
2 Empty the humidifier of water.
3 Insert the air path bypass unit.
6.6.2

Using the Heated Circuit

WARNING!
Read section 2.7 Humidification and Heating — Warnings and Precautions, page 16 before
using the Vivo 3 with the heated circuit.
NOTE
The heated circuit requires connection to the Mains power supply to work.
Information about safety, warnings, product description, installation, usage, cleaning,
maintenance and technical specifications can be found in the user instruction for the
heated circuit.
46 How to Use the Vivo 3
User Manual
a
Doc. 007231 F-3