Menus; Use The Menu - Breas Vivo 3 User Manual

The power source is indicated by a symbol at the top of the display.
Power Source
Mains
External DC
Internal battery
For connecting the Vivo 3 to both mains and external DC at the same time, the accessory
Power supply Y-cable is required.
If a power source fails, the Vivo 3 will switch to the next source in priority and show a mes-
sage on the display. If all available sources fail, the Power Failure alarm is given and the Vivo 3
shuts down.
Charging the Internal Battery
The internal battery is automatically charged when the Vivo 3 is connected to external
power. The state of charge is indicated by a symbol on the display. The green part of the
battery shows the state of charge.
Battery State of Charge
High
Charging
Preparing the Battery for Storage
If storing the Vivo 3, longer than 1 month, make sure that the internal battery is about half
charged before storing, in order to maintain maximum battery capacity. Optimal storage
temperature is 5 to 30°C (41 to 86°F).
3.5

Menus

3.5.1

Use the Menu

The menu consists of four function sections:
• Monitor
• Setup
• Alarm
• Others
24 Product Description
User Manual
Icon
Icon
Doc. 007231 F-3