Breas Vivo 3 User Manual page 31

3.5.5.3 Device Information
Information
Product name
Operating time
Battery Percentage
Battery Time Left
Software module
versions
3.5.5.4 Device Memory
Command
Save Memory Data on
Card
Erase Memory Data
Remove SD-card
3.5.5.5 Clock
Setting
Time
Date
Time Format
Date Format
Alarm Clock
Alarm Clock Time
Alarm Clock Volume
NOTE
The alarm clock works only when the ventilator is running on mains.
Doc. 007231 F-3
Description
The total number of hours the ventilator has been running in
operating mode.
Battery charge level
Estimated remaining usage time on battery power
Technical information for service personnel
Description
Copies the memory data from the internal memory to the
memory card.
Erases memory data from the internal memory
Remove the SD-card from the ventilator. (It must be ejected
manually, though.)
Description
Sets the time for the Vivo 3. The time is used for logs and
reports.
Sets the date for the Vivo 3. The date is used for logs and
reports.
Select whether to use 12 hr clock or 24 hr clock.
Select the date format to use.
Activates an alarm clock on the Vivo 3. One short signal every
5 seconds.
Sets the alarm time for the alarm clock.
Sets the volume for the alarm clock.
Product Description 29
User Manual