Breas Vivo 3 User Manual page 46

About the Attachable Humidifier
The humidifier is intended to humidify the patient air. It is intended for non-invasive use
only.
The humidifier is intended for stationary use and requires a connection to the Mains power
supply to work. During mobile use of the Vivo 3, remove the humidifier water chamber
and insert the air bypass unit.
Using the Attachable Humidifier for the First Time — Overview
1 Take out the air bypass unit by pressing the locking
latch (a) and then pulling it out.
2 Fill the humidifier with water.
3 Insert the humidifier.
Detach the Humidifier from the Vivo 3
1 If any treatment is running, stop it.
2 Push down the locking latch (a) and then pull the
humidifier out.
3 If you will use the Vivo 3 without the humidifier,
install the air bypass unit in place of the humidifier.
44 How to Use the Vivo 3
User Manual
a
a
Doc. 007231 F-3