Pause The Alarm Sound; Reset An Alarm - Breas Vivo 3 User Manual

Alarm Message on the Screen
The name of the active alarm is displayed on the screen.
• High priority alarms
Red highlight color.
• Medium priority alarms
Yellow highlight color.
For detailed information about specific alarms, see 7.3 Physiological Alarms, page 56 and
7.4 Technical Alarms, page 64.
Display of Multiple Alarms
If several alarms are active, active high priority alarms have precedence over medium prior-
ity alarms: All high priority alarm conditions must be resolved before any medium alarms
are displayed.
If several alarms of the same priority are active at the same time, the alarm descriptions are
looped in the display.
A ">>" symbol indicates that more alarms are to be displayed in the loop.
Alarm LED signal
• High priority alarms
Red light, flashing quickly (0.5 s. interval).
• Medium priority alarms
Yellow light, flashing slowly (2 s. interval).
7.2.2

Pause the Alarm Sound

The audible signal can be paused for 60 seconds by
pressing the Audio Pause button. Pressing the button
again reactivates the sound.
If a new alarm condition occurs during the audio
pause period, the audible signal will be reactivated.
7.2.3

Reset an Alarm

To reset an alarm, correct the cause of the alarm condition.
⇒Once the cause is corrected, the alarm disappears from the display.
WARNING!
If an alarm condition cannot be corrected, take the Vivo 3 out of use and contact your
supplier of the Vivo 3 e.
54 Alarms
User Manual
Doc. 007231 F-3