Controlling The Circle Size (Circle Centred, Aspect Ratio Off); Controlling The Circle Size And Position (Circle Centred, Aspect Ratio On); Controlling The Circle Size And Position (Circle Not Centred, Aspect Ratio Off)3-23; Controlling The Circle Size And Position (Circle Not Centred, Aspect Ratio - evertz 9590 Instruction Manual

3.8.3.2. Controlling the Circle Size (Circle Centred, Aspect Ratio Off)

Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
Size When the circle is centred and aspect ratio MODE is Off, the left shaft encoder is used to
adjust the height and the right shaft encoder is used to adjust the width about the centre of the
raster.

3.8.3.3. Controlling the Circle Size and Position (Circle centred, Aspect Ratio On)

Setup menu Force centre
Mode menu Aspect ratio
Or
Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
Size When the circle is centred and aspect ratio MODE is On, the left and right shaft encoders are
used to adjust the overall size of the circle proportionately about the centre of the circle while
maintaining the aspect ratio selected.

3.8.3.4. Controlling the Circle Size and Position (Circle not centred, Aspect Ratio Off)

Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
When the circle centring is Off and aspect ratio MODE is Off the position and the H and V size of the circle
lines can be positioned independently.
Size The left shaft encoder is used to adjust the height of the circle, and the right shaft encoder is
used to adjust the width of the circle.
Position The left shaft encoder is used to adjust the vertical position of the circle, i.e. move the circle up
or down, and the right shaft encoder is used to adjust the horizontal position of the circle, i.e.
move the circle left or right.

3.8.3.5. Controlling the Circle Size and Position (Circle not centred, Aspect Ratio On)

Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
When the circle centring is Off and aspect ratio mode is On the position and overall size of the circle can
be adjusted proportionately about the centre of the circle based upon the aspect ratio selected.
RACK MOUNT PANEL OPERATION
Models 9590 & HD9590 Graticule Generator Manual
no Setup menu
off Mode menu
or
H + V
Yes
1:1 4:3 14:9 16:9
No
1:1 4:3 14:9 16:9
H + V
no
off
off
No
1:1 4:3 14:9 16:9
off
Force centre yes
Aspect ratio off
1.67:1 1.85:1 2.35:1
1.67:1 1.85:1 2.35:1
1.67:1 1.85:1 2.35:1
Page 3-23