Table of Contents
Advertisement
5.2.
WRITE-PROTECTING THE USER PRESETS
Each of the ten user preset memory locations can be locked against accidental overwriting. If the user
attempts to store a preset into a locked location the front panel will display the message
Preset n locked, where n is the number of the user preset.
To lock one of the presets using the integrated front panel or the rack mount remote panel press the ESC
and PRESET SAVE buttons at the same time. The control panel will display Protect preset #. Press
the USER PRESET button corresponding to the location you wish to lock. The control panel display will
show Confirm lock n. To confirm the locking of this preset press the PRESET SAVE button. The
control panel will show the message Preset n locked. To unlock one of the presets press the ESC
and PRESET SAVE buttons at the same time. The control panel will display Protect preset #. Press
the USER PRESET button corresponding to the location you wish to unlock. The control panel display will
show Confirm unlock n. To confirm the unlocking of this preset press PRESET SAVE button. The
control panel will show the message Preset n unlocked.
To lock one of the presets using the desktop remote panel, press the ESC and PRESET SAVE buttons at
the same time. The control panel display will show Protect preset #. Select the location you wish to
lock using the SHIFT LOCK and USER PRESET buttons. The control panel display will show Confirm
lock n. To confirm the locking of this preset press the PRESET SAVE button. The control panel display
will show the message Preset n locked.
PRESET SAVE buttons at the same time. The control panel display will show Protect preset #.
Select the location you wish to unlock using the SHIFT LOCK and USER PRESET buttons. The control
panel display will show Confirm unlock n.
PRESET SAVE button. The control panel display will show the message Preset n unlocked.
5.3.
DISPLAYING THE FRIMWARE VERSION ON THE FRONT PANEL
On the 9590 you can only see the firmware version when the unit forst powers up and following a 2 minute
timeout after any button has been pressed.
On the HD9590 you can display the firmware version on the front panel display using the following
procedure.
If you are using the integrated control panel or the rack mount control panel, press the ON/OFF, 4 and 9
buttons simultaneously. If you are using the desktop remote control panel press the ESC and GRID
buttons simultaneously. The control panel display should now show the current firmware version of the
unit. Press any key to return to the main display.
5.4.
UPDATING THE FIRMWARE IN THE GRATICULE GENERATOR
The firmware in the Graticule Generator is contained in a FLASH EPROM device. From time to time
firmware updates will be provided to add additional features to the unit. The following procedure will allow
you to upload new firmware from your computer.
TECHNICAL DESCRIPTION
Models 9590 & HD9590 Graticule Generator Manual
To unlock one of the presets press the ESC and
To confirm the unlocking of this preset press the
Page 5-3
Advertisement
Table of Contents
