Table of Contents
Advertisement
Models 9590 & HD9590 Graticule Generator Manual
4.7.5.2. Controlling the Box Size(Aspect Ratio On)
Auto Aspect ratio
When auto aspect ratio mode is On, the shaft encoders are used to adjust the overall size of the box
proportionately about the centre of the raster based upon the aspect ratio selected. The left knob adjusts
the top right corner of the box and the right knob adjusts the bottom right corner of the box.
4.7.5.3. Controlling the Box Size and Position (Objects not centred, Aspect Ratio Off)
Setup menu
Auto Aspect ratio
When Force Centre is Off and, and auto aspect ratio mode is Off the left shaft encoder is used to adjust
the bottom side of the box, and the right shaft encoder is used to adjust the right side of the box.
4.7.6. Controlling the Box Position
Press the POS button while the box button is blinking to control the position of the box. When auto aspect
ratio mode is Off and the Setup menu Force Centre item is set to no the left shaft encoder is used to
adjust the vertical position of the box, i.e. move the box up or down, and the right shaft encoder is used to
adjust the horizontal position of the box, i.e. move the box left or right. The remote panel display will show
the box position while the POS button is brightly illuminated.
deselected after 3 minutes of panel activity, or when the another button is pressed.
If one of the auto aspect ratios is selected or the Setup menu Force Centre item is set to yes, then the
position of the box is fixed to the centre of the clean aperture. The display will show Box centred.
4.8. CONTROLLING THE CIRCLE OBJECT
4.8.1. Turning the Circle Object On and Off
To turn on the circle object press the CIRCLE
blink item on the Setup menu is enabled), and the circle will be turned on. The CIRCLE
blink indicating that the circle object is selected. To turn off the circle object, press the CIRCLE
when the CIRCLE button is blinking.
Page 4-18
1:1
4:3
14:9
16:9
Force centre
no
off
1.67
1.85
2.35
The position adjust function will be
button. The circle object will blink momentarily (if the obj
DESKTOP REMOTE OPERATION
button will
button
Advertisement
Table of Contents
