Saving User Presets; Recalling User Presets - evertz 9590 Instruction Manual

4.10.1. Saving User Presets

To save the current object settings into one of the ten user preset memory locations, press the
PRESET SAVE button. The Front panel display will show Store Preset #. Select the location you
wish to store the settings to using the SHIFT LOCK and USER PRESET buttons. The Front panel
display will show SAVE to store n where n is the number of the user preset.
PRESET SAVE button a second time to confirm the operation (The Front panel display will show
Preset n stored) or press the ESC button to abort the store operation. If the user attempts to store a
preset into a write protected location the front panel will display the message Preset n locked.
User Presets cannot be deleted directly from memory they can only be overwritten
by another configuration saved to the same memory location.

4.10.2. Recalling User Presets

To load the current object settings from one of the ten user preset memory locations; select the location
you wish to recall the settings from using the SHIFT LOCK and USER PRESET buttons.
Recalling one of the user presets will overwrite the current object settings and
cannot be undone. Make sure you want to overwrite your current settings before
you recall one of the user presets
DESKTOP REMOTE OPERATION
Models 9590 & HD9590 Graticule Generator Manual
Press the
Page 4-21