The Object Push-Button Group; The Setup Button Group - evertz 9590 Instruction Manual

Models 9590 & HD9590 Graticule Generator Manual
darkened control room. When the button is active, it will be illuminated brightly, or it may blink between
dim and bright illumination. The Setup menu provides a means of setting overall constraints on the
Graticule Generator, allowing you to configure the device to your application. Six user preset buttons and
one factory preset button allow you to save and recall frequently used collections of objects, to simplify
operation of the Graticule Generator.
The remainder of this section gives an overview of each of the front panel buttons. Sections 4.2.10 to 4.8
give detailed information on controlling each of the screen objects.

4.1.1. The Object Push-button Group

The Object key group consists of the six object keys. The object key group is used to select individual
objects and turn them on or off. Then one of the object buttons is pressed it turns on the respective object
and selects it for control. The button will blink when the object is selected. To turn off the object, press
the button a second time while it is blinking. The selected object will be automatically de-selected after
two minutes of inactivity on the front panel. Individual objects will also be deselected when another object
is selected. Objects that are turned On but not selected will have their corresponding button brightly
illuminated.
GRID Pressing this button selects and turns on the grid object.
MASK Pressing this button selects and turns on the mask object
CURSOR Pressing the button once selects and turns on the cursor object.
BOX1 Pressing the button once selects and turns on the box1 object.
BOX2 Pressing the button once selects and turns on the box2 object.
CIRCLE Pressing this button selects and turns on the circle object
AUTO ASPECT This button controls whether the Graticule Generator operates in one of the fixed
aspect ratios or whether the objects can be independently sized and positioned. See
section 4.3.1 for more information about auto aspect ratio mode.

4.1.2. The Setup Button Group

This button group consists of two buttons located adjacent to the display. The actions of this button group
affect all objects.
SETUP Pressing this button allows you to program various global attributes for the objects, and to
configure the overall operating modes for the Graticule Generator. See section 4.2 for a
complete description of the setup modes.
ESC This button is used to exit out of menus or to abort setup operations.
Page 4-2 DESKTOP REMOTE OPERATION