Controlling The Box Attributes; Controlling The Box White Level; Controlling The Box Size (Box Centred, Aspect Ratio Off); Controlling The Box Size And Position (Box Centred, Aspect Ratio On) - evertz 9590 Instruction Manual

Models 9590 & HD9590 Graticule Generator Manual

3.7.3. Controlling the Box Attributes

When the box object is selected the CTRL SEL button is used to select which of its attributes (white level,
position, size, or individual sides of the box) will be adjusted by turning the shaft encoder knobs. Press
the CTRL SEL button until the desired CTRL SEL item is shown on the front panel. When you have
chosen the desired CTRL SEL item press the BOX button again or turn one of the shaft encoder knobs to
begin controlling the box.
The items that will be shown in the box CTRL SEL menu depend on the MODE settings and the settings in
the SETUP menu. In the sections describing the CTRL SEL items, the relevant settings from the box
MODE and SETUP menus are shown where necessary.

3.7.3.1. Controlling the Box White Level

Level The white level can be adjusted in the range of "0" through "14", in single digit increments,
using either shaft encoder with "0" corresponding to "black" and "14" corresponding to "white".

3.7.3.2. Controlling the Box Size (Box Centred, Aspect Ratio Off)

Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
Size When the box is centred and aspect ratio MODE is Off, the left shaft encoder is used to adjust
the height and the right shaft encoder is used to adjust the width about the centre of the raster.

3.7.3.3. Controlling the Box Size and Position (Box centred, Aspect Ratio On)

Setup menu Force centre
Mode menu Aspect ratio
Or
Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
Size When the box is centred and aspect ratio MODE is On, the left and right shaft encoders are
used to adjust the overall size of the box proportionately about the centre of the raster based
upon the aspect ratio selected.

3.7.3.4. Controlling the Box Size and Position (Box not centred, Aspect Ratio Off)

Setup menu Force centre
Mode menu Aspect ratio
Mode menu Centre
When the box centring is Off and aspect ratio MODE is Off the sides of the box can be positioned
independently in one of four modes.
Page 3-20
no Setup menu
off Mode menu
or
H + V
Yes
1:1 4:3 14:9 16:9
No
1:1 4:3 14:9 16:9
H + V
no
off
off
Force centre yes
Aspect ratio off
1.67:1 1.85:1 2.35:1
1.67:1 1.85:1 2.35:1
RACK MOUNT PANEL OPERATION