Table of Contents
Advertisement
HD9510UC High Definition Upconverter Manual
3.3.14. Setting the Left and Right Panel Widths (Not on early versions)
The H BLANK START and H BLANK END menus allows the user to adjust the width of the side panels
These menu items are not available on early versions that do not have a gen lock reference. The values
must be set separately for each OUTPUT ASPECT ratio and VIDEO STANDARD combination.
H BLANK START
H Bl Start: xx
H BLANK END
H Bl End: xx
3.3.15. Setting the Top and Bottom Panel Widths (Not on early versions)
The V BLANK START and V BLANK END menus allows the user to adjust the start and end of vertical
blanking on the HD output picture. These menu items are not available on early versions that do not have
a gen lock reference. The values must be set separately for each OUTPUT ASPECT ratio and VIDEO
STANDARD combination.
V BLANK START
V Bl Start: xx
V BLANK END
V Bl End: xx
3.3.16. Setting the limits of the Standard Definition Image that will be Upconverted
(Not on early versions)
The H POSITION, H SIZE, V POSITION and V SIZE menus allow the user to adjust the area of the
standard definition picture that will be upconverted. These menu items are not available on early versions
that do not have a gen lock reference. The values must be set separately for each OUTPUT ASPECT
ratio and VIDEO STANDARD combination.
H POSITION
H Pos: xx
V POSITION
V Pos: xx
H SIZE
H Size: xx
V SIZE
V Size: xx
Page 3-12
Sets the right side panel width.
Sets the left side panel width.
Sets the bottom side panel height.
Sets the top side panel height.
Sets the left edge of the standard definition picture that will be upconverted.
Sets the top edge of the standard definition picture that will be upconverted.
Sets the width of the standard definition picture (starting from the H POSITION
value) that will be upconverted.
Sets the height of the standard definition picture (starting from the V POSITION
value) that will be upconverted.
Revision 1.1.1
OPERATION
Advertisement
Table of Contents
