Controlling The Audio Embedder; Controlling The Test Generator; Setting The Image Position In 4:3 Side Panel Mode; Setting The Side Panel Colour - evertz HD9510UC Instruction Manual

HD9510UC High Definition Upconverter Manual

3.3.5. Controlling The Audio Embedder

AUDIO
EMBEDDER
Off
On

3.3.6. Controlling The Test Generator

TEST
GENERATOR
Off
Bars

3.3.7. Setting the Image Position in 4:3 Side Panel Mode

4:3 POSITION
Left
Center
Right

3.3.8. Setting the Side Panel Colour

SIDE PANEL
COLOUR
Black
Gray
Yellow
Red
Green
White

3.3.9. Blanking Line 21 Captions

LINE 21
BLANKING
Off
On

3.3.10. Setting the Upconverter Delay

The OUTPUT DELAY menu allows the user to choose one of two delay modes when the upconverter is
referenced to input video. This menu item has no effect when the REFERENCE SIGNAL menu item is not
set to Video In.
Page 3-8
The AUDIO EMBEDDER menu allows the user to pass through embedded
audio from the input to the output.
Group 1 audio will be De-embedded from the input and re-embedded on the
output, delayed to match the upconversion delay.
The TEST GENERATOR menu allows the user to generate a test colour bar
pattern on the HD output. This signal is useful for determining cable wiring
integrity downstream of the Upconverter.
The 4:3 POSITION menu allows the user to set the position of the original
image within the 16:9 raster when the upconverter is in 4:3 side panel mode.
The SIDE PANEL COLOUR menu allows the user to set the colour of the side
panels when the upconverter is in 4:3 Side Panel or 14:9 Crop mode.
The LINE 21 BLANKING menu allows the user to blank line 21 where closed
captions may be present.
Revision 1.1.1
OPERATION