evertz HD9510UC Instruction Manual page 25

OUTPUT ASPECT
4:3 Side Panel
16:9 Crop
16:9 Stretch
14:9 Crop
INSTALLATION
HD9510UC High Definition Upconverter Manual
When the OUTPUT FORMAT menu item is set to 1080i, 1035i, or 720p There
are 4 output aspect ratio choices available.
Select 4:3 Side Panel if the input image is a conventional 4:3 image filling the
compete raster. In this mode, images will be normally be upconverted so that
the 4:3 image sits in the center of the 16:9 HD raster with side panels. The
position of the image can be set by the 4:3 POSITION menu item.
Select 16:9 Crop if the input image is a letterboxed 16:9 in the 4:3 raster. In this
mode, images will be upconverted so that the letterboxed image width is
enlarged to fill the complete 16:9 HD raster width. The top and bottom of the
image will be cropped.
Select 16:9 Stretch if the input image is a 16:9 image that has been squeezed
to fit into the 4:3 raster (often referred to as anamorphic). In this mode, images
will be upconverted so that the 16:9 image width is stretched to fill the complete
16:9 HD raster.
Select 14:9 Crop if the input image is a letterboxed 14:9 in the 4:3 raster. In this
mode, images will be upconverted so that the letterboxed image height is
enlarged to fill the complete 16:9 HD raster height. The top and bottom of the
image will be cropped and the output image will have side panels.
Revision 1.1.1
Page 3-5