Ip Route; Ip Routing - Planet Networking & Communication WGSW-48040HP Command Manual

4.2.67 ip route

Command:
ip route <ipv4_addr> <ipv4_netmask> <ipv4_gateway>
ip Internet Protocol
route Add IP route
<ipv4_addr> Network
<ipv4_netmask>
<ipv4_gateway>
Default:
None
Usage Guide:
To configure static route
Example:
To configure static route as below table.
Switch# configure terminal
Switch (config)# ip route 192.168.1.0 255.255.255.0 192.168.0.1

4.2.68 ip routing

Command:
ip routing
ip Internet Protocol
routing Enable routing for IPv4 and IPv6
Default:
None
Usage Guide:
To enable IP routing
Example:
To enable IP routing
Netmask
Gateway
Command Guide of WGSW-48040HP
-181-