Energy Saving Setting - Fujitsu AIRSTAGE UTY-ALGX Instruction Manual

25.

Energy Saving Setting

Make a necessary basic setting related energy saving before operate it. And, the setting may be also re-
newed because of device or tenant changing.
Make a basic setting related necessary energy saving before operation.
Please set it according to the follow flow when you set first time after installation. AS the setting and chang-
ing from operation starting, please in according to the contents after chapter 25-2 when needed.
Flow at initial setting
Please set it in accordance with this flow when at first setting.
Energy saving understand, precautions
Confirmation
Outdoor units and electricity meter setting
Check the items to be decided beforehand.
Unit registration
Electricity meter system settings
Create Energy Saving Group
Energy saving main screen
Indoor unit rotation operation
25-2-4 Indoor unit rotation
operation setting display
Outdoor units capability save
25-3-3 Outdoor unit capacity
save display
Peak cut control
25-4-2 Peak cut operation
display
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
33.Electricity Meter System
34.Installation Restriction of Electricity Meter
35. Installation Restriction of Energy Saving
36. The Settings of Outdoor Unit and System
37.Electrical Wiring
22.The flow of the process up to operation
menu
23. Creating an electricity meter system
OK or Cancel
menu
OK or Cancel
Setting
OK or Cancel
Setting
OK or Cancel
Setting
OK
or Cancel
222
Units
Controller Lite
25-1 Energy saving group setting
25-2-1 Indoor unit rotation operation setting
Edit
25-2-3 Indoor unit rotation operation schedule setting
25-3-1 Outdoor unit capacity save setting
Edit
25-3-3 Outdoor unit capacity save display
25-4-1 Peak cut operation setting
OK
or Cancel
OK or Cancel