Table of Contents
Advertisement
575555
Main screen
The screen is for description purposes.
The contents which can be selected vary depending on the setting.
Selects whether or not electric charge apportionment is to be performed and is entered by [Apply] but-
ton.
Displays the data acquisition state. If "Data acquisition is active." is displayed, data acquisition is per-
formed normally.
If
to
are not set correctly, "Data acquisition is not active." is displayed in red.
In this case, data acquisition are not performed and apportionment calculation cannot be performed.
Basic setting
Overall setting is performed at electricity charge apportionment calculation. (For details, see par. 27-3.)
Sets whether or not the power consumption of indoor units is included in electricity charge apportion-
ment calculation. (For details, see par. 27-4.)
Display contents of
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
"Calculate for all units":
"Do not calculate":
"Custom setting":
250
5
Includes the power of all indoor units in apportion-
ment calculation.
Does not include the power of all indoor units in ap-
portionment calculation.
Includes the power of some indoor units in appor-
tionment calculation.
Advertisement
Table of Contents
