Table of Contents
Advertisement
Arrange units to the created group.
(Arrangement by duplicating units to different groups is also possible.)
1. Select the group at which units in the
"Undefined Group".)
2. Select the unit or units you want to arrange in the
"+Shift key" or "+Ctrl key".)
3. Click the
[Add] button.
4. The units are arranged in the group selected at step 1. (The arranged units are not displayed at
"Undefined Group" in the
[Arrangement by right click]
Right click the unit you want to arranged in the
Arrangement is also possible by right clicking the arrangement destination group in the
and selecting "Paste". (Selection from "Undefined Group" of
Check for duplicate arranged units
1. Select the unit whose duplication you want to check in the
2. If there is a duplicate unit, the relevant unit in the
Moving created group and arranged units to a different hierarchy and group (When a group is moved, the
units under that group follow it. In addition, movement to a position exceeding 3 hierarchies is impossible.)
1. Select the group and units whose hierarchy you want to move in the
tion is possible by "+Shift key" or "+Ctrl key".)
2. Click the
[Cut] button.
3. Select the move destination group or site.
4. Click the
[Paste] button.
5. The group and units move to under the group or site selected at step 3.
[Movement by right click]
Right click the group and units to be moved in the
group or site above the move destination and select "Paste".
[Movement by dragging]
Movement is possible by dragging the group and units to be moved in the
Delete a created group and release arranged units.
1. Select the group and unit you want to delete or release in the
possible by "+Shift key" or "+Ctrl key".) "Undefined Group" and "Site" cannot be deleted.
2. Click the [Delete] button of
are displayed at "Undefined Group" in the
[Deletion and removal by right click]
Right click the group and unit to be deleted and released in the
Note
When the group is set, the monitoring screen is closed. To display the monitoring screen after the setting
completes, click the main menu screen → "Display" → "Unit List"
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
group tree are to be arranged. (Cannot be arranged to
Group tree.)
unit list tree and select "Copy".
group tree and select "Cut". Right click one
or 5. The units which are released and not belonging to any group
group tree.
104
unit list tree. (Multiple selection is possible by
is also possible.)
group tree.
group tree will be highlighted.
group tree. (Multiple selec-
group tree.
group tree. (Multiple selection is
group tree and select "Delete".
group tree
Advertisement
Table of Contents
