Table of Contents
Advertisement
555555
Indoor unit rotation operation schedule setting
Schedules selected at Indoor unit rotation operation setting screen and a schedule pattern is displayed.
In This schedule, up to 4 operation patterns can be defined annually.
For the regions that have distinct seasons such as spring, summer, autumn, winter, rainy season and dry
season, set the schedule according to each season.
Disable the patterns that are not used.
To display this screen, click the "Edit" button on Indoor unit rotation operation setting screen.
A pattern character (A~D) selected at Indoor unit rotation operation setting screen is displayed.
Set a day of week day which apply to pattern. Multiple days of week can be selected. One or more
days of week must be selected.
Set a period which apply to pattern. Period must be set.
When the start of the period was set to February 29, years that are not a leap year are controlled from
March 1.
When the end of the period was set to February 29, years that are not a leap year are controlled up to
February 28.
Set the time to create schedule pattern. One or more schedule pattern must be created more than 1.
Control is a setting of within 24 hours.
When you want to control up to the next day
(Example 22:00 to 05:00)
By entering the 2 periods 22:00 to 00:00 and 00:00 to 05:00 and setting them to consecutive days of
the week, control is performed continuously without stopping even if the day of week is changed
5
Press [Delete] button to delete selected time.
Press [OK] button to save the information of weekday (
Press [Apply] button to save the information of weekday (), period (), time (), then continue set-
ting.
Press [Cancel] button to throw away editing data, and exit.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
), period (), time () and exit.
228
5
Advertisement
Table of Contents
