Table of Contents
Advertisement
Indoor unit display
Item
R.C.Group Name
Remote controller group name
System Type
Displays the type of refrigerant system (cooling only or heat pump).
Adaptor Name
Connected U10 USB Network Interface adaptor name
Displays the address for each unit. "Refrigerant system address"-"Unit
Address
address"-"R/C address" or "Refrigerant system address"-"Unit address"-
"R/C address"-"RBG No"
Unit model name
The letter ":" as the last letter of the Model Name signifies that the
Model Name
Model Name for the corresponding unit was written after shipment.
The letter ":" is not part of the Model Name.
Type
Operation
Timer
Operation Status
Master / Slave
OP.Restriction
Filter
Displays the operation mode. (Displayed even when stopped.)
Cool / Dry / Heat / Auto /Fan/ "-"(S/V Series : Stop)
Operation Mode
Displays the background color during operation. See (b).
Set Temp.
Displays the set temperature.
Displays the air flow setting.
Fan Speed
Auto/Quiet/Low/Med-Low/Med/Med-High/High
Displays the R/C prohibited state. For the icon
R.C.Prohibition
→See par. 17-2 Detail operation.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Display contents
1
Indoor unit icon.*
The status of each unit can be
checked. See (a) Display color guidance
Operation status. ON / OFF / Test
Schedule timer set state.
Timer set
Timer setting invalid
Identifies master indoor unit and slave indoor unit
by icon. (Cooling/Heating switching cannot be set
for slave unit.)
Master unit
Slave unit
Slave unit by outdoor unit
Displays an icon during emergency stop,
maintenance, and operation prohibited
restriction.
Displays the status of the filter sign by icon.
For the icon → See par. 17-2 Detail operation.
(V-II/V-III/VR-II/J-II/J-IIS Series : Off)
155
System
correspondence
V-II/V-III/
S/V
VR-II/J-II/
Series
J-IIS
Series
-
-
Advertisement
Table of Contents
