Table of Contents
Advertisement
27-4
Indoor unit electricity calculation setting
To display this screen, click the [Setting] button of the "Indoor Unit Setting" item on the electricity charge ap-
portionment main screen.
Whether or not the electricity charge of indoor units is included in calculation is decided by this screen.
Description of Indoor Unit Setting
5
Selects the indoor unit calculation type.
"Include All Indoor
Units Into The Calcu-
lation."
"Exclude All Indoor
Units From The Cal-
culation."
"Select For Each
Refrigerant System"
Select according to the power meter position and contact with the electric power company.
Note
If a setting is changed during data acquisition, the results of calculation after setting will also change.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
The electricity charge of indoor units is also included in calculation. Select
when the power meter is shared by the indoor unit and outdoor unit power
source and when the power meter of the same contract destination as an
outdoor unit is installed at an indoor unit power source. (Settings
cannot be performed.)
The indoor unit electricity charge is not included in calculation. Select when
a power meter independently contracted with the electric power company
by tenants is installed at the indoor unit power source, etc. (Settings to
5 cannot be performed.)
Select when setting whether or not indoor unit power consumption is in-
cluded in calculation for each refrigerant system.
253
to
5
Advertisement
Table of Contents
