Table of Contents
Advertisement
8-3
Initial setting
Makes any settings and changes necessary before operation.
Select the item to be set from main screen menu → "Setting" → "Initial Setting".
Item
Site Name Setting
Adaptor Setting
Unit Registration
Unit Name Registration
Group Setting
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
The site name can be set and changed. (For details, see par. 8-3-1.)
The transmission adaptor (U10 USB Network Interface) name can be changed
and the connection state can be confirmed. (For details, see par. 8-3-2.)
The connection state of each unit can be confirmed by network scan (For de-
tails, see par. 8-3-3.)
Note) During scanning at secure reg. unit operation is stopped.
R/C group and outdoor unit group name can be set and changed. (For details,
see par.8-3-4.)
An arbitrary group can be set by combining R/C group and outdoor group. (Up
to hierarchy)
Batched control and data can be obtained by setting a group.
Group setting by different refrigerant systems and duplicate setting at multiple
groups are also possible. (For details, see par. 8-3-5.)
91
Contents
Advertisement
Table of Contents
