Table of Contents
Advertisement
11.
Starting And Ending The VRF Controller
VRF Controller
The VRF Controller connects to the VRF System at the server PC and controls and monitors the system
based on operation commands from the VRF Explorer. During VRF System operation, always keep the
VRF Controller in the running state.
11-1
VRF Controller starting method
Start the VRF Controller from Windows
Select "Start" → "All Programs" → "System Controller Lite for VRF System" → "VRF Controller".
Note
When the message "Failed to recognize software protection key" appears, WIBU-KEY is not connected
to server PC.
Connect WIBU-KEY to the USB port and restart the VRF Controller.
When the Login screen appears, enter the administrator's password.
Click the [OK] button.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
®
starting.
112
Password entry area
Advertisement
Table of Contents
