Table of Contents
Advertisement
To display this screen, select main screen menu → "Setting"→ "Initial Setting" → "Unit Name Registration"
Description of Unit name registration screen
5
Unit list
: Displays a list of all the units registered by scanning.
Changing to ascending order/descending order sorting of the selected column is possible by clicking
the header part of the list.
The names of the connected adaptors are displayed. (Name set by par. 8-3-2 Transmission
Adaptor Name
adaptor setting.)
Address
"Refrigerant system address" – "Unit address" – "R/C address"
R.C.G. Name, outdoor unit group name
Unit Name/
When
R.C.G. Name
bol). Blanks are not allowed.
Model Name
Model name*
Automatic
Registration
Displays the operation ON detection time
Time
*The letter ":" as the last letter of the Model Name signifies that the Model Name for the corresponding unit
was written after shipment. The letter ":" is not part of the Model Name.
[Default Name] button:
Returns all the R/C group and outdoor unit group names to their default names.
Name Automatically In The Order Of Operation checkbox
set and automatic allocation can be performed in indoor unit operation order.
Unit name cannot be changed from the unit list of .
Adaptor Name:
To perform automatic name setting over an entire VRF network, select "All".
(When "All" was selected,
To perform setting by specifying a refrigerant system range, select "Specify Refrigerant System Range"
and specify the start number and end number of refrigerant system.
If you select "All" and then execute, all units will stop.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
is not checked, editing is possible. Within 20 characters (Alphabet, numeric, and sym-
cannot be set.)
5
98
: When checked, , 5, and
can be
Advertisement
Table of Contents
