Table of Contents
Advertisement
85555
Unit registration
Scans by the network and detects and registers usable R/C groups and outdoor units and electricity me-
ters.
The units registered by scanning are managed by System Controller Lite.
To display this screen, select main screen menu → "Setting"→ "Initial Setting" → "Unit Registration".
Description of screen
5
Note
When the PC system time is turned back by time change operation and the start date of contract or
block for electricity charge apportionment is at some future date, the contract and block are deleted at
the completion of scanning.
If the following message is displayed after scanning is completed, the necessary information cannot be
acquired.
"Information was not acquired for some units. Perform unit registration again."
In this case, always perform scan again to acquire all the necessary information.
If advanced to next as is, normal operation will become impossible.
Especially, if there is a unit for which information could not be acquired when electricity charge appor-
tionment is performed, the refrigerant system including that unit will not be handled by the electricity
charge apportionment function.
When these information missing units are included in "Unit Newly Detected", since they are displayed
in red characters, treat them as the index of refrigerant system specification when rescanning.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
94
(a)
Advertisement
Table of Contents
