Table of Contents
Advertisement
The groups set in Group Setting Screen will be displayed.
The indoor units which is not registered in any group will displayed in "Undefined Group".
Press [Add] button to add the indoor units selected at
5
Press [Remove] button to delete selected energy saving group or release selected indoor units from
energy saving group.
Energy saving group tree, or the address and model name of indoor unit group which included in a
group being selected at group tree will be displayed information list.
Press [OK] button to save energy saving groups and indoor units, then exit.
Press [Cancel] button to throw away editing data, then exit.
Show an icon to the indoor unit in the tree on right and refer to it at the time of registration.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
to energy saving group selected in .
This shows indoor units not registered in any Energy Saving Group.
These can be added to a selected Energy Saving Group.
When an Energy Saving Group is selected in , this shows indoor units regis-
tered to it.
When none or multiple Energy Saving Groups are selected in , this shows
indoor units registered to any Energy Saving Group.
When an Energy Saving Group is selected in , this shows indoor units regis-
tered to the other Energy Saving Groups.
Outdoor units.
Units which cannot be registered to Energy saving Group.
(S Series units, V Series units, UTY-VGGXZ1).
224
Advertisement
Table of Contents
