Table of Contents
Advertisement
[New Meter] button or [Edit] button of Electricity Meter Zone Setting screen
Select one from the list of adaptors on the adaptor setting screen.
Select a number from the list of meter numbers for those connected to the adaptor selected in
Enter the electricity meter name.
The maximum number of character you can enter is 20, or you can leave this blank or enter multiple
numbers.
Set whether to handle by specifying how many kWhs correspond to one pulse from the electricity me-
ter.
For the number value only enter 7 or fewer digits for whole numbers and 6 or fewer for digits after the
decimal point.
Note
"1" is displayed as the initial value, however, set this to match the electricity meter you are using.
5
Select the type.
Select 'Available' if the meter measures V-II/V-III/VR-II/J-II/J-IIS series indoor/outdoor/RB units, be-
cause they can use the energy saving function.
Select 'Unavailable' if the meter measures air conditioning systems connected via UTY-VGGXZ1 net-
work converters, because they cannot use the energy saving function.
[OK]: Saves the edited contents and ends setting.
[Cancel]: Ends setting without saving the edited contents.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
213
5
.
Advertisement
Table of Contents
