Setting Autonaming Scheme - EXFO AXS-200 User Manual

Measuring Power or Loss

Setting Autonaming Scheme

Setting Autonaming Scheme
When saving data, the unit suggests fiber IDs based on autonaming
settings. After saving a value, the unit prepares the next fiber ID according
to the selected increment (0, 1, or 2).
To define the cable name, the starting fiber ID, and increment
values:
1. Press
and then Instrument View.
2. Using the arrows next to the
function keys (F1/F2/F3), display
Cable and, using the
corresponding function key, press
Cable.
3. Using the up/down arrows, select
New Cable, and then press
4. Enter the required information
and press Apply to confirm the
changes.
28
, select Power Meter,
.
AXS-200/350 and AXS-200/360