Deactivating The Offset Nulling Message - EXFO AXS-200 User Manual

Deactivating the Offset Nulling Message

By default, when the unit detects a significant change in temperature or
humidity, it displays a message requesting you to perform an offset nulling.
If you do not want the unit to show this message, proceed as follows:
To deactivate the offset nulling message:
1. Press
and then Configuration.
2. From the Power Meter tab, using
the up/down arrows, select
Display "offset Nulling"
warning, and press
3. In the list, select No.
OLTS and Power Meter
, select Power Meter,
.
Measuring Power or Loss
Deactivating the Offset Nulling Message
15