Defining A List Of Favorite Wavelengths - EXFO AXS-200 User Manual

Measuring Power or Loss

Defining a List of Favorite Wavelengths

Defining a List of Favorite Wavelengths
You must put the wavelengths you want to use on a list of favorite
wavelengths. Specifications are guaranteed for calibrated wavelengths
only. For other wavelengths, the unit will determine values based on the
calibrated wavelengths (3-point interpolation).
To add a wavelength to the power meter list:
1. Press
and then Configuration.
2. From the Power Meter tab, select
Item, and press
All the wavelengths available in
the power meter are followed by
PM=Yes.
3. If you are satisfied with the list,
press
OR
If you want to add a wavelength,
close the list, select New
Wavelength, and enter a value.
The new value appears in the
Item list followed by PM=Yes.
12
, select Power Meter,
.
.
AXS-200/350 and AXS-200/360