Detecting Wavelength Automatically - EXFO AXS-200 User Manual

Olts and power meter

Table of Contents

Measuring Power or Loss

Detecting Wavelength Automatically

When the source you are using is equipped with a feature, that allows

transmission of the wavelength value, such as Auto-wavelength and

Auto-switching modes, the power is automatically set to that wavelength.

Note: When you receive such a signal, you cannot manually change the power

meter wavelength. The power meter behavior is totally determined by the

source.

To receive the source's wavelength value automatically:

1. Connect the source to your power meter.

2. Turn on the source.

3. Activate the Auto-wavelength or Auto-switching mode.

Activate the equivalent feature.

Your power meter automatically matches the source wavelength.

AXS-200/350 and AXS-200/360

Table of Contents

Do you have a question about the AXS-200 and is the answer not in the manual?

Axs-200/350 Axs-200/360