Table of Contents
Advertisement
When the high-voltage output is used (option 002 is
Option
installed), the minimum and maximum permissible DC
offset voltages may be determined by multiplying the
amplitude and offset values in Table 5-4 by four. The
equation given on the previous page must be changed to:
Maximum DC offset = (20/A) - (Amptd/'L)
where A = Attenuation factor (from Table 5-4) and
Amptd = Amplit,ude
Resolution of a DC offset entry is determined by the
resolution of the AC amplitude.
The following example shows how to change the DC
Example
offset to
The
"1" is displayed.
The IX offset is accepted, and "1 V DC" is displayed.
in V(p-p) of the AC function.
1.0
V
Result
display is shown.
"OFFS"
is highlighted.
Parameters 5-13
Advertisement
Table of Contents
