Table of Contents
Advertisement
MKS; Select
Markers
The MKS command allows you to select which markers
you wish to activate when you have selected only one
interval, but multi-markers with the MMS command.
IMKS causes the instrument to output a list of the
activated markers. Use the MMF command to set the
frequency of the various markers.
Instrument Preset value:
Both commands are not available on the HP 3325A.
Syntax
1 to 9
Table E-15. IMKS Response Format
Query Command
IMKS
All 9 markers
Meaning
Response Format
HP 3324A Command Syntax E-17
Advertisement
Table of Contents
