Table of Contents
Advertisement
Installation
Introduction
Safety
Considerations
This appendix provides installation instructions for the
HP 3324A. It also includes information about initial
inspection and damage claims, preparation for use,
packaging, storage and shipment.
The Model HP 3324A is a Safety Class 1 instrument
(instrument with an exposed metal chassis that is
directly connected to earth via the power supply cable).
The symbol used to indicate a protective earth terminal
in the instrument is .& .
Before operation, the instrument and manual, including
the red safety page, should be reviewed for safety
markings and instructions. These must then be followed
to ensure safe operation and to maintain the instrument
in safe condition.
Power is supplied to some of the HP 3324A circuits
at any time that the instrument is connected to the
AC power source. To disconnect from the line power,
disconnect the power cord either at the rear power-inlet
or at the AC line-power source (recepticle). One of these
must be accessible at all times. If the instrument is
installed in a cabinet, it must be disconnected from the
line power by means of the system's line-power switch.
0
C
Installation C-l
Advertisement
Table of Contents
