Table of Contents
Advertisement
Multi-Interval
Sweep
Note
7-4 Sweep
The start, stop and marker frequencies that can be
programmed for an interval depend on the waveform
chosen. The frequency ranges are:
Table 7-2. Frequency Ranges
I
Function
Squarewave
Triangle
Pos. slope ramp
Neg. slope ramp
Logarithmic sweeps must have a start frequency of at
least 1 Hz.
A multi-interval sweep consists of from 1 upto 50
individually-progammed
of intervals available for programming can be set
in the Utilities menu (see Choosing the Number of
Stores/Intervals
in
chapter
Changing the number of intervals will cause the HP
3324A to reset all sweep intervals to their default state,
and all stores to be cleared, so don't program any
intervals until you are sure you have enough available.
I
0 t o 21 000 000.000 Hz
0 t o 11 000 000.000 Hz
0 to 11 000.000 Hz
0 to 11 000.000 Hz
0 to 11 000.000 Hz
sweep
intervals.
The
8).
I
number
Advertisement
Table of Contents
